HOW TO CHECK
Depending on the characteristics of products, various methods are available for checking the video.
LCD
Check video on a real-time basis via Live View
OPEN
ATTACH
CONNECT
Clean the windshield where the product is
to be placed.
Remove the 3M tape after placing
the product on the car holder.
Connect the power cable.
(For the 2-channel DASH CAM, connect the rear-camera cable)
Place the product on the front window behind
the room mirror horizontally with the car.
From the outside of the car, check if the lens
is located in the middle of the car.
Arrange lines.
(Tip: It looks clean if you put lines into the A pillar)
Attach the rear camera on the rear window
following the same method as the front camera.
Connect the cigar-jack power.
Run the product and check videos from
the front and rear camera in the Live View mode.
Depending on the characteristics of products, various methods are available for checking the video.
Check video on a real-time basis via Live View
Please download the manual and the latest software of
THINKWARE DASH CAM product .
